ELEGANT BATH CABINET CONSTRUCTION


PRODUCT LINE
CONSTRUCTION

EXPLORE
DOOR STYLES

CABINET
FINISHES

DECORATIVE DOORS
AND EMBELLISHMENTS

CUSTOMIZE YOUR
CABINETRY




The Elegant Bath Collection is an Extensive Selection of Coordinated Designer Vanity Suites

  • Offers individual style with everyday luxury
  • Furniture, modern, transitional, traditional and classic style suites.
  • Wall mount suites.
  • Corner vanity and curved vanity suites.
  • Matching decorative mirrors, linen cabinets, medicine cabinets, lighting and more.
  • Over 30,000 door styles, species and finish combinations.
  • ColorInspire paint option available on maple and MDF cabinetry.
  • Semi-custom options for more design flexibility.
  • Extensive selection of stains and paints with glaze and finish technique options.
  • Traditional overlay, full overlay and inset door styles.
  • Standard all wood cabinet construction.
  • Dovetail solid hardwood drawers with full extension soft close slides.
  • Lifetime limited warranty.

Your local Wellborn Dealer stands ready to answer any questions you may have about the Elegant Bath Collection.

Designer Vanity Suites Construction

Modern, transitional, traditional, classic, corner and curved elegant bath suites:

Vanity sink cabinets are 34 inches high by 21 inches deep and available in widths from 18 inches to 36-inch wide. Single bowl vanity base cabinets are available in 30, 36 and 48-inch widths. You can get both single and double bowl vanity base cabinets in 57 and 60-inch widths.

Corner Vanity Cabinets

 Corner vanity sink cabinets are available in 21 and 24-inch depths, 34-inch high with widths of 21 or 25 inches to choose from.

Curved Vanity Cabinets

 Curved vanity sink cabinets are available in 21 and 36-inch widths.


Ask your local Wellborn Dealer about matching vanity linen cabinets, mirrors and medicine cabinets are also available allowing you to coordinate your bath suite.


Designer Vanity Suites - Premier Series Construction

Base

Colonie Base with Legs
Top Hanging Rail
Additional Information Link
I-Beam Support
Additional Information Link
Backs
Additional Information Link
Face Frame
Additional Information Link
End Panels
Additional Information Link
Hinges
Additional Information Link
Bottom Hanging Rail
Additional Information Link


Image above is shown with Colonie feet for example purposes

TOP HANGING RAIL


¾” x 3½” Laminated solid hardwood or plywood hanging rail.



I-BEAM SUPPORT


½” I-Beam plywood support dadoed into front, back and side.



BACKS


3⁄16” Wood grain laminated plywood back. Cabinet backs are glued and stapled into end panels, top and bottom or bottom hanging rail.



FACE FRAMES


¾” Thick kiln-dried solid wood face frames. Width of frame varies based on individual suite characteristics. All face frame joints are precisely aligned with blind mortise and tenon, glued and stapled at all joints.



END PANELS


¾” Flush plywood end panels with finished exterior and laminated interior. End panels are resistant to household chemicals and are machined to accept tops, bottoms and shelves.



HINGES


Concealed Hinge (CH) 6-way adjustable, satin nickel finished concealed hinge design with smooth close feature.



BOTTOM HANGING RAIL


¾” Plywood hanging rail dadoed to recieve cabinet floor.



Drawer Details

Drawer Construction

Tall

Tall Colonie Cabinet with Legs
Backs
Additional Information Link
Tops & Bottoms
Additional Information Link
Adjustable Shelves
Additional Information Link
End Panels
Additional Information Link
Hinges
Additional Information Link
Drawer
Additional Information Link
Image above is shown with Colonie feet for example purposes

BACKS


3⁄16” Wood grain laminated plywood back. Cabinet backs are glued and stapled into end panels, top and bottoms.



TOPS AND BOTTOMS


½” Wood grain laminated plywood veneer tops and bottoms. A dado joint, glue and staples are used to attach the top.



ADJUSTABLE SHELVES


¾” Laminated plywood shelves with wood grain edge banding. The shelves are resistant to water and household chemicals. The cabinet sides are drilled for dual locking WellLock Shelf Clips® which are adjustable at 32mm increments.



END PANELS


¾” Flush plywood end panels with finished exterior and laminated interior. End panels are resistant to household chemicals and are machined to accept tops, bottoms and shelves.



HINGES


Concealed Hinge (CH) 6-way adjustable, satin nickel finished concealed hinge design with smooth close feature.



DRAWERS


5/8-inch Solid hardwood drawer in a natural finish with a laminated plywood drawer bottom, dovetail construction and full extension drawer slides featuring soft close. The soft close feature allows for a smooth quiet drawer that prevents rebounding and keeps items from shifting. The full depth drawer box is screwed to the drawer front with large washer head screws that allow for adjustment. The drawer has a 75lb. weight capacity. Drawer slides are fitted into a bracket mounted to the cabinet back.





Designer Vanity Suites - Estate Series Construction

Base

Base Cabinet
Top Hanging Rail
Additional Information Link
I-Beam Support
Additional Information Link
Backs
Additional Information Link
Face Frames
Additional Information Link
Tops & Bottoms
Additional Information Link

TOP HANGING RAIL


¾” x 3½” Wood grain laminated solid hardwood or plywood hanging rail.



I-BEAM SUPPORT


¾” I-Beam (Furniture Suite excluded) plywood support dadoed into front, back and side.



BACKS


½” Natural finished plywood veneer back. Cabinet backs are glued and stapled into end panels, tops and bottoms.



FACE FRAMES


¾” Thick kiln-dried solid wood face frames. Width of frame varies based on individual suite characteristics. Overlay and nonbeaded face frame joints are precisely aligned with blind mortise and tenon, glued and stapled at all joints and beaded face frames use pocket screws. Inset frames available beaded or non-beaded except where specified. INSET ONLY frame options: Beaded (B) Non-Beaded (NB)



TOPS & BOTTOMS


¾” Natural finished plywood veneer tops (Corner only) and bottoms. A dado joint, glue and staples are used to attach the top.



Drawer Details

Drawer Side Details

Tall

Tall Base Cabinet
Tops & Bottoms
Additional Information Link
Adjustable Shelves
Additional Information Link
Hinges
Additional Information Link
End Panels
Additional Information Link
Drawers
Additional Information Link

TOPS & BOTTOMS


¾” Natural finished plywood veneer tops and bottoms. A dado joint, glue and staples are used to attach the top.



ADJUSTABLE SHELVES


¾” Natural finished plywood shelves with wood grain edge banding. The shelves are resistant to water and household chemicals. The cabinet sides are drilled for decorative chrome shelf supports which are adjustable at 32mm increments.



HINGES


OVERLAY (Standard) & INSET Concealed Hinge (CH) 6-way adjustable, satin nickel finished clip-on concealed hinge design with a smooth close feature and door stop.

INSET (Optional) Barrel Hinge (BH) — 4-way adjustable available in 3 finishes and includes coordinating magnetic catches.



END PANELS


¾” Flush plywood end panels with finished exterior and natural finished veneer interior. End panels are resistant to household chemicals and are machined to accept tops, bottoms and shelves.



DRAWERS


5/8-inch Solid hardwood profiled drawer in a natural finish with a 3⁄16” natural finished veneer drawer bottom, dovetail construction and full extension drawer slides featuring soft close. The soft close feature allows for a smooth quiet drawer that prevents rebounding and keeps items from shifting. The full depth drawer box is screwed to the drawer front with large washer head screws that allow for adjustment. The drawer has a 75lb. weight capacity. Drawer slides are fitted into a bracket mounted to the cabinet back.





Overlay Basics

Wall

Basic Wall Cabinet
Top Hanging Rail
Additional Information Link
Top & Bottoms
Additional Information Link
Face Frame
Additional Information Link
Hinges
Additional Information Link
Adjustable Shelves
Additional Information Link
Backs
Additional Information Link
Bottom Hanging Rail
Additional Information Link

TOP HANGING RAILS


¾” x 3½” Wood grain laminated solid hardwood or plywood hanging rail.



TOPS & BOTTOMS


½” Wood grain laminated plywood tops and bottoms. A dado joint, glue and staples are used to attach the top.



FACE FRAME


¾” x 1¾” Kiln-dried solid wood face frames. All face frame joints are precisely aligned with blind mortise and tenon, glued and stapled at all joints.



HINGES


Concealed Hinge (CH) 6-way adjustable, satin nickel finished WellLine® smooth close concealed hinge.



ADJUSTABLE SHELVES


¾” Laminated plywood shelves with wood grain edge banding. The shelves are resistant to water and household chemicals. The cabinet sides are drilled for WellLock Shelf Clips® which are adjustable at 64mm increments.



BACKS


3⁄16” Wood grain laminated plywood veneer back. Cabinet backs are glued and stapled into end panels, tops and bottoms/bottom hanging rails.



BOTTOM HANGING RAIL


¾” Plywood hanging rail dadoed to receive cabinet floor.



Drawer Details

Base

Basic Construction Base
I-Beam Support
Additional Information Link
Backs
Additional Information Link
Drawers
Additional Information Link
Bottom
Additional Information Link
Bottom Hanging Rail
Additional Information Link
End Panels
Additional Information Link
Toe Kick
Additional Information Link

I-BEAM SUPPORT


½” I-Beam plywood support dadoed into front, back and side.



BACKS


3⁄16” Wood grain laminated plywood veneer back. Cabinet backs are glued and stapled into end panels, tops and bottoms/bottom hanging rails.



DRAWERS


5/8-inch Solid hardwood drawer in a natural finish with a laminated plywood drawer bottom, dovetail construction and full extension undermount drawer slides featuring soft close. The soft close feature allows for a smooth quiet drawer that prevents rebounding and keeps items from shifting. The full depth drawer box is screwed to the drawer front with large washer head screws that allow for adjustment. The drawer has a 75lb. weight capacity. Drawer slides are fitted into a bracket mounted to the cabinet back or hanging rail.



BOTTOMS


½” Wood grain laminated plywood tops and bottoms A dado joint, glue and staples are used to attach the top.



BOTTOM HANGING RAIL


¾” Plywood hanging rail dadoed to receive cabinet floor.



END PANELS


½” Unfinished plywood end panels with laminated interior. End panels are resistant to household chemicals and are machined to accept tops, bottoms and shelves. Flush Cabinet End (FCE) and Integrated Matching End (IME) options are available.



TOE KICK


¾” X 4½” Unfinished plywood toe kick with captive construction, 3⅜” depth.



Inset Basics

Wall

Basic Wall Cabinet
Hinges
Additional Information Link
Backs
Additional Information Link
Adjustable Shelves
Additional Information Link
Top & Bottom
Additional Information Link
Face Frame
Additional Information Link

HINGES


Two options available:

Concealed Hinge (CH) 6-way adjustable, satin nickel finished clip-on concealed hinge design with a smooth close feature and door stop.

Barrel Hinge (BH) 4-way adjustable available in 3 finishes and includes coordinating magnetic catches.



BACKS


½” Natural finished plywood veneer back. Cabinet backs are glued and stapled into end panels, tops and bottoms.



ADJUSTABLE SHELVES


¾” Natural finished plywood shelves with wood grain edge banding. The shelves are resistant to water and household chemicals. The cabinet sides are drilled for decorative chrome shelf supports which are adjustable at 32mm increments.



TOPS & BOTTOMS


¾” Natural finished plywood veneer tops and bottoms. A dado joint, glue and staples are used to attach the top and bottom into face frames, back and end panels.



FACE FRAME


¾” X 1¾” Kiln-dried solid wood face frames. Available beaded or non-beaded except where specified. Non-beaded face frame joints are precisely aligned with blind mortise and tenon, glued and stapled at all joints and beaded face frames use pocket screws.



Drawer Details

Drawer Details

Base

Basic Inset Door
I-Beam Support
Additional Information Link
Drawers
Additional Information Link
End Panels
Additional Information Link
Toe Kick
Additional Information Link

I-BEAM SUPPORT


¾” I-Beam plywood support dadoed into front, back and side.



DRAWERS


5/8-inch Solid hardwood profiled drawer in a natural finish with a 3⁄16” natural finished maple veneer drawer bottom, that is dadoed into all sides, dovetail construction and full extension drawer slides featuring soft close. The soft close feature allows for a smooth quiet drawer that prevents rebounding and keeps items from shifting. The full depth drawer box is screwed to the drawer front with large washer head screws that allow for adjustment. The drawer has a 75lb. weight capacity. Drawer slides are fitted into a bracket mounted to the cabinet back.



END PANELS


¾” Flush plywood end panels with unfinished exterior and natural finished veneer interior. End panels are resistant to household chemicals and are machined to accept tops, bottoms and shelves. Finished Matching End (FME) and Integrated Matching End (IME) options are available.



TOE KICK


½” X 4½” Unfinished plywood toe kick with captive construction, 3⅜” depth.



Modena Wall Mount Suite Vanity Construction

 This modern wall mount suite offers vanity wall mounts with blank fronts and full height doors in 21 inches deep, 21 inches high and widths of 24, 30 and 36 inches. It also offers vanity wall mounts with drawers in 12 to 24-inch widths

Vanity wall mount linen cabinets are available with doors or doors and drawers. You may select from 21 inches deep by 60- inches high cabinets in your choice of 18 and 24-inch widths.



Modena Wall Mount Vanity Suite - Estate Series Construction

Tall

Backs
Additional Information Link
Face Frame
Additional Information Link
Hanging Bracket
Additional Information Link
Adjustable Shelves
Additional Information Link
Top & Bottoms
Additional Information Link

BACKS


¾” Natural finished plywood veneer back. Cabinet backs are glued and stapled into end panels, tops and bottoms.



FACE FRAME


¾” X 1¾” Kiln-dried solid wood face frames. All face frame joints are precisely aligned with blind mortise and tenon, glued and stapled at all joints.



HANGING BRACKET


Internal metal hanging brackets are attached to end panels and back for securing to wall.



ADJUSTABLE SHELVES


¾” Natural finished plywood shelves with wood grain edge banding. The shelves are resistant to water and household chemicals. The cabinet sides are drilled for decorative chrome shelf supports which are adjustable.



TOPS & BOTTOMS


¾” Natural finished plywood veneer tops and bottoms. A dado joint, glue and staples are used to attach the top and bottom into face frames, back and end panels.



Drawer Details

Drawer Details

Base

Wall mount Base
Hanging Bracket
Additional Information Link
Drawers
Additional Information Link
End Panels
Additional Information Link
Hinges
Additional Information Link

HANGING BRACKETS


Internal metal hanging brackets are attached to end panels and back for securing to wall.



DRAWERS


5/8-inch Solid hardwood drawer in a natural finish with a 3⁄16” natural finished maple veneer drawer bottom, dovetail construction and full extension drawer slides featuring soft close. The soft close feature allows for a smooth quiet drawer that prevents rebounding and keeps items from shifting.



END PANELS


¾” Flush plywood end panels with finished exterior and natural finished veneer interior. End panels are resistant to household chemicals and are machined to accept tops, bottoms and shelves.



HINGES


Concealed Hinge (CH) 6-way adjustable, satin nickel finished concealed hinge design with a smooth close feature.





Website selection may not be exactly what is available. Wellborn reserves the right to make revisions without notice to product specifications. Please contact your Wellborn Dealer for Availability.
Back to top